What Ceiling Height Is Needed For a 2-Post Lift?

 

A two-post lift requires a certain amount of height above the floor to function properly. It has tall posts and a connecting bracket that runs across the posts. As a result, Mechanic Superstore for 2 post car liftmeasuring the height of your ceiling is very important. You will need to know this measurement in order to find the right two-post lift for your home.

ANSI-certified

When shopping for a 2-post lift, check the manufacturer's recommendations for ceiling height. Depending on your vehicle, you may need height adapters to adjust the height of the lift. For example, if your vehicle has a low ceiling, you might want to use a pad adapter. However, never try to make your own adapters or use wood blocks. This can invalidate the lift's certification.

A typical two-post lift needs a ceiling height of 11 feet or higher. A 4-post lift, on the other hand, requires a ceiling height of 8 feet or higher. However, if your garage ceiling height is lower than this, you can still install a lift. Nevertheless, you will need two feet of clearance on each side, so make sure that the garage ceiling is at least 8 feet high. In addition, make sure that the ceiling height is at least six inches higher than the lift's floor height.

Adaptable

Low ceilings pose a unique challenge to business owners who need to install a 2-post lift. One option is a mid-rise scissor lift, which allows you to raise the lift points without lowering the floor. However, these lifts are not suitable for suspension work or lifting individual parts of the vehicle.

Another option is a symmetrical lift. This is best for shops that don't have high ceilings. This lift can fit most cars, light trucks, and vans, but is not as suitable for heavy-duty trucks and buses. It can also be used for low ceiling shops.

Cost

The cost of a 2-post lift can vary depending on the ceiling height of your building. For example, a small apartment might only need a lift that can handle three to four tons, but a large home may need one that can handle ten or more tons. You should also consider the size of the work area you need the lift for.

A two-post lift is a versatile, reliable solution that can handle a wide variety of applications. They are available in different widths and heights to accommodate different ceiling heights. Some models, such as the Clearfloor model, offer unobstructed floor space and allow you to move automotive equipment underneath the lifted vehicle.

Size

The size of 2-post lift you choose depends on the height of your ceiling. If you have an eight to twelve-foot ceiling, choose the baseplate version, which has 9-foot high columns and a steel plate that houses the hydraulic hose and equalization cables. If your ceiling is higher than eight feet, you'll want to choose the overhead model, which features a bar that crosses the cables and leaves the floor clear. Most RTD 2-post lifts have standard 220V power units, but if you're running a lower voltage, you can choose the 110-volt version, which will eliminate wiring costs.

Choosing the correct size two-post lift is simple. Measure the height of your ceiling and measure the height of the posts, which are typically five to six feet high. The height of the ceiling determines the height of the two-post lift's connecting bracket, which runs across the posts. Make sure to take into account any obstacles in the ceiling, such as antennas.

Dimensions

When building a garage, the dimensions of a 2-post lift are an important consideration. The two-post lift must be tall enough to be easily accessible from the garage ceiling. The ceiling height should be at least 12 feet, or higher if the lift is for a larger truck.